• eng
  • rus
Select category

Pneumatic liquid filler 300-2500 ml

Pneumatic liquid filler 300-2500 ml
Pneumatic liquid filler 300-2500 ml - photo 1
Renewed: 11 August 2023, 07:52 ID: 3279
Flagma member since 6 September 2018
Ftp Engineering
project Manager


The device is designed for dosing liquids with lower and higher viscosity in volumes from 300 ml to 2,500 ml.

The filler works in two modes - manual and automatic.
During manual filling, where after setting the dose is dispensed using the foojam filling machinet pedal or the device allows the setting of the automatic mode - then the dose works continuously depending on the movement of the piston.

Such an automatic device is recommended if there is an integrated belt conveyor under the filler.

The device includes a hopper for product loading with a volume of 26 L - the volume of dose is controlled by two electromagnetic sensors. The sensors sense the position of the piston.

Suitable for products with higher viscosity:
Inlet pressure: 0.4 - 0.6MPa
Output needle: length 32mm, inner diameter 7.6m
Dosing speed: depending on viscosity and amount of 0 - 30 bottles / min
Dosing accuracy: +/- 1 - 2%
Power supply: 230V 1A AC, 10W
Material: stainless steel
Hopper volume: 26L
Dose: 300 - 2500ml
Viscosity of dosing liquids: gel / paste
safety STOP button
Control: Foot pedal / automatic
Dimensions: 300 (w) x 650 (h) x 1080 (h) mm
Weight: 35kg

The owner of the ad has the most up-to-date information.

Similar ads

Nails for pneumatic tools
2.30/1000 pieces
We produce and sell nails for pneumatic tools. Any volume, excellent quality. 2,1*28 2,1*32 2,1*35 2,1*40 2,5*40 2,5*45 2,5*50 2,5*55 2,5*60 2,5*70 2,8*60 2,8*70 2,8*80 3,1*90 2,1*40 With a beveled tip 2,1*45 With a beveled tip 2,1*50 With a beveled tip 2,1*55 With a beveled tip
17 Jun 2022
Pneumatic liquid filler - liquid dispenser 10 - 100ml
Single-head piston filler - liquid dispenser for volumes from 10 to 100 ml per dose with manual and automatic filling mode, designed primarily for filling less dense liquids with a viscosity in the range of water to oil.
+50 ads
11 Aug 2023
Show more
Works by Flagma since 6 September 2018
Ftp Engineering
project Manager
Ftp Engineering
Project Manager
Say, that you found an ad on Flagma
Safety rules: Do not agree to prepayment if you are not sure about the reliability of the user.
Write a message
FTP ENGINEERING, S.R.O. Ftp Engineering, Project Manager
Pneumatic liquid filler 300-2500 ml
3,459/piece ID: 3279
Select category