Biodiesel production equipment CTS, 2-5 tons/day (automatic), vegetable oil

High quality equipment from one of the best European manufacturers. Reliable, technologically advanced, at a reasonable price, significantly lower than that of competitors. CTS equipment, 2-5 tons/shift, for the production of biodiesel from any Vegetable oil - sunflower, rapeseed, cottonseed, coconut, etc. Unlike companies that produce equipment for the production of biodiesel based on old, "barrel" technologies used in the last century, our company uses the principle of magnetic pulse high-frequency cavitation, which was used in secret technologies, which allows us to achieve significant advantages: Undemanding to the quality of the original oil as well as all types of animal fats and their mixtures with vegetable oils. These are sunflower, rapeseed, linseed, palm, mustard, etc., with almost any acid number, as well as overcooked oil waste from restaurants and bakeries, beef, pork and chicken fats - waste from livestock and poultry processing factories. Passing the reaction "in one pass" In the magnetic pulse cavitation technology, it is not necessary to carry out a repeated interesterification reaction, as in the old "barrel" technologies. The time for obtaining finished biodiesel is reduced by 8-10 times. Cleaning with sorbents, washing and drying of biodiesel is not required. The minimum amount of alcohol and catalyst. No alcohol recovery. During cavitation treatment, oil heating is not required, and as a result, energy savings are 5-7 times. Low temperature reaction at room temperature. Magnetic pulse high-frequency cavitation treatment in the reactor occurs at the molecular level. All components are subjected to pulses of magnetically directed cavitation. The minimum overall dimensions of the modules are 5-10 times smaller than traditional complexes of similar performance. Biodiesel from vegetable oil. BNR 500 (500 liters per hour) automatic The BNR 500 automatic system consists of: PPS-CT 1200: electronic system for pre-dosing and processing of raw products. ROTON-B 15 - magnetic impulse reactor for BNR 500. Automatic control system (electric cabinet, PLC, PC, software, etc.) Pipes, fittings, etc. Separation system: 6.1. Separation tank, sensors, pump, valves, etc. 7.2. Electronic monitoring system for bottling, separation and unloading of finished products Technical parameters: Productivity, liter per hour 500 Rated power, kW 18 Weight (approximately), kg 785 Degree of automation full Mode of operation continuous Processing capacity, kWh / liter (no more) 0.028 Capacity adjustment yes Area occupied by one module, m2 3.1 Overall dimensions (L x W x H), mm 2650x1390x2290 Fanuc, etc. All BioST mechanisms are ATEX certified, which ensures the safe operation of the unit with liquids such as methanol and catalyst. BioSTs are designed to operate continuously for 24 hours and require no special maintenance. Our company is engaged in the complex design of Turnkey Biodiesel Plants.